Eventuri Mercedes A35 AMG, GLA35, GLB35, A250 Carbon Intake
Eventuri Mercedes A35 AMG, GLA35, GLB35, A250 Carbon Intake is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
The Mercedes A35 AMG Eventuri intake has been developed to provide the turbo with a less restrictive flow path whilst maintaining low inlet temperatures. Reducing heat soak and increasing internal volume are the main considerations when designing an intake for turbocharged engines. In the A35, the intake system is in close proximity to the exhaust manifold which rapidly heat soaks the engine bay. High temperatures are detrimental for engine performance as the turbo would have to build boost with heated, less dense air and so the only way to ensure IAT's are kept to a minimum is for a fully sealed intake. In order to reduce the restriction from a sealed intake we have increased the volume of the airbox by relocating the ECU and also allowing an opening in the airbox on the cold side which is away from the direct heat of the manifold. The carbon inlet tube is larger in internal volume with a starting internal diameter of 111mm (4.4") smoothly tapering down to match the turbo inlet pipe. Finally we use a custom made high-flow dry filter which is ISO tested for filtration performance and has a larger filtration area than the stock filter.
Performance:
Dyno testing was carried out by MSL Performance who are a Mercedes specialist based in the UK. A fully standard A35 AMG was tested with the stock airbox and then with the Eventuri intake back to back whilst ensuring external conditions were the same. As can be seen below the intake provides a gain in performance throughout the RPM range. The highlighted point shows a significant gain of power where the intake allows a higher flow rate to be maintained in the higher RPM range where the stock airbox starts to become a restriction. The resulting gains are noticeable on the road with better throttle response and improved acceleration times. With a tuned A35 we would expect even better gains as the demand from the turbo increases.
Product details:
- EVE-A35-CF-INT : Mercedes A35 AMG, A250 Carbon Intake
The Eventuri A35 intake system consists of a number of components engineered to perform a specific purpose and fabricated to the highest of standards. We use 100% pre-preg carbon fiber with no fibreglass which means we can achieve a smooth internal surface to maintain smoother airflow. Here are the details for each component and the design ethos behind them:
Each intake system consists of:
- Carbon Fiber Airbox
- Bespoke High Flow Dry Cone Filter
- Carbon Fiber Inlet Tube
- CNC Machined Inlet Flange
- Laser Cut Stainless Steel Brackets and ECU Cover
- Silicon Coupler with OEM Specification Clamps
Carbon Fiber Airbox
Crafted from Prepreg Carbon Fiber, the airbox serves 2 objectives - to seal the filter against engine bay heat and to provide a dual cold air feed. Since the airbox is positioned next to the exhaust manifold it is crucial for the filter to be sealed so we designed the airbox to encapsulate the filter and at the same time provide a large internal volume. The intake tube passes through a rubber seal in the airbox which ensures heated air does not enter. By relocating the ECU, we have been able to increase the height of the airbox to maximise volume and therefore allows us to use a larger filter.
Having a fully sealed airbox results in the problem of having a restriction for the cold air feed. The stock airbox draws air from a single duct through a rubber section which also has multiple ridges. Our design eliminates this rubber section and therefore provides a smoother cold air entry path. Furthermore to derestrict the intake, we have added a cutout on the cold side of the airbox near the bonnet shut which allows the filter to draw additional air.
Bespoke Cone Filter
Our cone filter is made from a non-woven mesh material which is double layered and is ISO tested to ensure that filtration is in line with OEM standards. The filter is cleanable and very stable at high temperatures with the base material being Urethane. The filter incorporates an internal flow guiding cone to help aid the airflow to converge while reducing the possibility of a stagnation point in the middle of the filter space. The filter medium has a significantly larger surface volume than the stock panel filter.
Can I return a product after install?
Once a product has been installed, used or fitted it is no longer returnable.
How long do I have to return a product?
Customers have 7 days inclusive from the day they receive their order to lodge a “Return Request” with ModsDirect. If the return form is approved (notification by email) the item must then be returned within 21 days. All returns must be trackable.
Please note that exchanges, refunds or credits will NOT be processed until the returned product(s) is received by ModsDirect.
Where do items need to be returned to?
After submitting a “Return Request” form, ModsDirect will be in touch via email to confirm details for return.
How do I return items?
All returns must be returned to ModsDirect by courier or post. All returns must be trackable. In some instances, ModsDirect may offer a return label.
What about restocking fees?
All returns will incur a fee of 15%. This is to cover fees incurred by ModsDirect for payment processing and handling. We are at the mercy of paying for services used at our website regardless of whether the order remains completed or reversed.
Who pays for return shipping?
All return shipping costs are the responsibility of the customer. However, if a customer has received the incorrect product, ModsDirect will cover return fees and provide a courier pickup at no cost to the customer.
Exchange, Credit or Refund?
If a customer requests a return, they may be eligible for either an exchange, credit or refund based on the nature of the return and product availability. If refunding, moneys will be returned to the customer via the original payment gateway used at checkout.
Can I drop a return off to ModsDirect?
Sorry, no in-store return option is presently available.
I damaged the packaging during unboxing, can I still return?
Unfortunately not. All packing materials must be in resalable condition for a return. Some minor damages such as a neat cut of a package seal may still be eligible for return. Please include a photo of the packaging with your Return Request form.
By purchasing from ModsDirect you agree to the Return Policy outlined above.
The “Vehicle Fitment” tab found on ModsDirect product listings are to be used as a guide ONLY. ModsDirect does not take responsibility for any misinformation on the Vehicle Fitment tab. The customer must ensure proper and correct fitment on their vehicle prior to ordering. If any errors are found in any product, you are encouraged to inform ModsDirect by clicking here.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.