{"title":"Radium Engineering Australia | Authorised Distributor - Catch Cans, Fuel Rails, Surge Tanks \u0026 More","description":"\u003cp\u003eModsDirect is an \u003cstrong\u003eauthorised Australian distributor for Radium Engineering\u003c\/strong\u003e, stocking the full range of genuine, USA-made Radium products including \u003cstrong\u003ecatch cans, dual catch cans, air-oil separators (AOS), fuel surge tanks, fuel rails, fuel cells, fuel pressure regulators, AN fittings, and complete fuel system kits\u003c\/strong\u003e. All products are CNC-machined from billet aluminium to Radium's exacting tolerances, backed by \u003cstrong\u003emanufacturer warranty\u003c\/strong\u003e, held in \u003cstrong\u003elocal Australian stock\u003c\/strong\u003e for fast dispatch nationwide, and offered at \u003cstrong\u003eAustralia's best prices\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eAs a trusted Radium Engineering stockist, ModsDirect provides \u003cstrong\u003eexpert fitment advice\u003c\/strong\u003e, genuine part verification, and dedicated technical support, so you get the right component for your build the first time. Whether you're upgrading a BMW, Nissan, Subaru, Mitsubishi, or any performance platform, shop with confidence knowing you're buying \u003cstrong\u003e100% genuine Radium Engineering\u003c\/strong\u003e from Australia's performance parts authority.\u003c\/p\u003e","products":[{"product_id":"20-1000-0608","title":"Radium V2 AN ORB to AN Male Flare Low Profile Swivel Banjo Fittings (6AN ORB SWIVEL BANJO TO 8AN MALE)","description":"\u003cp\u003eThese banjo fittings have the ability to rotate 360 degrees, even after installation. They are an excellent option for 90-degree connections and are very low profile. Suitable for use in high pressure fuel and oil systems. Do not exceed 400 psi.\u003c\/p\u003e\n\n\u003cp\u003eIndividual Specifications as follows:\u003c\/p\u003e\n\n\u003cp\u003e20-1000-0406 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0606 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0606F Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0806 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0808 Installed Height (bottom of hex to top): 1.019in (25.9mm)\u003cbr\u003e\n20-1000-1006 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-1008 Installed Height (bottom of hex to top): 1.019in (25.9mm)\u003cbr\u003e\n20-1000-1010 Installed Height (bottom installed surface to top): 1.121in (28.5mm)\u003cbr\u003e\n20-1000-1012 Installed Height (bottom installed surface to top): 1.286in (32.7mm)\u003cbr\u003e\n20-1000-101010 Installed Height (bottom installed surface to top): 1.121in (28.5mm)\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988603081021,"sku":"20-1000-0608","price":58.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/20-1000-0608.jpg?v=1763118691"},{"product_id":"20-1000-1010","title":"Radium V2 AN ORB to AN Male Flare Low Profile Swivel Banjo Fittings (10AN ORB to 10AN Male)","description":"\u003cp\u003eThese banjo fittings have the ability to rotate 360 degrees, even after installation. They are an excellent option for 90-degree connections and are very low profile. Suitable for use in high pressure fuel and oil systems. Do not exceed 400 psi.\u003c\/p\u003e\n\n\u003cp\u003eIndividual Specifications as follows:\u003c\/p\u003e\n\n\u003cp\u003e20-1000-0406 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0606 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0606F Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0806 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0808 Installed Height (bottom of hex to top): 1.019in (25.9mm)\u003cbr\u003e\n20-1000-1006 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-1008 Installed Height (bottom of hex to top): 1.019in (25.9mm)\u003cbr\u003e\n20-1000-1010 Installed Height (bottom installed surface to top): 1.121in (28.5mm)\u003cbr\u003e\n20-1000-1012 Installed Height (bottom installed surface to top): 1.286in (32.7mm)\u003cbr\u003e\n20-1000-101010 Installed Height (bottom installed surface to top): 1.121in (28.5mm)\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988603113789,"sku":"20-1000-1010","price":58.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/20-1000-1010.jpg?v=1763118692"},{"product_id":"20-1000-1212","title":"Radium V2 AN ORB to AN Male Flare Low Profile Swivel Banjo Fittings (12AN ORB Swivel Banjo to 12AN Male)","description":"\u003cp\u003eThese banjo fittings have the ability to rotate 360 degrees, even after installation. They are an excellent option for 90-degree connections and are very low profile. Suitable for use in high pressure fuel and oil systems. Do not exceed 400 psi.\u003c\/p\u003e\n\n\u003cp\u003eIndividual Specifications as follows:\u003c\/p\u003e\n\n\u003cp\u003e20-1000-0406 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0606 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0606F Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0806 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0808 Installed Height (bottom of hex to top): 1.019in (25.9mm)\u003cbr\u003e\n20-1000-1006 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-1008 Installed Height (bottom of hex to top): 1.019in (25.9mm)\u003cbr\u003e\n20-1000-1010 Installed Height (bottom installed surface to top): 1.121in (28.5mm)\u003cbr\u003e\n20-1000-1012 Installed Height (bottom installed surface to top): 1.286in (32.7mm)\u003cbr\u003e\n20-1000-101010 Installed Height (bottom installed surface to top): 1.121in (28.5mm)\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988603146557,"sku":"20-1000-1212","price":58.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/20-1000-1212.jpg?v=1763118694"},{"product_id":"20-1000-1006","title":"Radium V2 AN ORB to AN Male Flare Low Profile Swivel Banjo Fittings (10AN ORB to 6AN Male)","description":"\u003cp\u003eThese banjo fittings have the ability to rotate 360 degrees, even after installation. They are an excellent option for 90-degree connections and are very low profile. Suitable for use in high pressure fuel and oil systems. Do not exceed 400 psi.\u003c\/p\u003e\n\n\u003cp\u003eIndividual Specifications as follows:\u003c\/p\u003e\n\n\u003cp\u003e20-1000-0406 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0606 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0606F Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0806 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0808 Installed Height (bottom of hex to top): 1.019in (25.9mm)\u003cbr\u003e\n20-1000-1006 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-1008 Installed Height (bottom of hex to top): 1.019in (25.9mm)\u003cbr\u003e\n20-1000-1010 Installed Height (bottom installed surface to top): 1.121in (28.5mm)\u003cbr\u003e\n20-1000-1012 Installed Height (bottom installed surface to top): 1.286in (32.7mm)\u003cbr\u003e\n20-1000-101010 Installed Height (bottom installed surface to top): 1.121in (28.5mm)\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988603244861,"sku":"20-1000-1006","price":58.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/20-1000-1006.jpg?v=1763118696"},{"product_id":"20-1000-0806f","title":"Radium V2 AN ORB to AN Male Flare Low Profile Swivel Banjo Fittings (8AN ORB SWIVEL BANJO TO 6AN FEMALE)","description":"\u003cp\u003eThese banjo fittings have the ability to rotate 360 degrees, even after installation. They are an excellent option for 90-degree connections and are very low profile. Suitable for use in high pressure fuel and oil systems. Do not exceed 400 psi.\u003c\/p\u003e\n\n\u003cp\u003eIndividual Specifications as follows:\u003c\/p\u003e\n\n\u003cp\u003e20-1000-0406 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0606 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0606F Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0806 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0808 Installed Height (bottom of hex to top): 1.019in (25.9mm)\u003cbr\u003e\n20-1000-1006 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-1008 Installed Height (bottom of hex to top): 1.019in (25.9mm)\u003cbr\u003e\n20-1000-1010 Installed Height (bottom installed surface to top): 1.121in (28.5mm)\u003cbr\u003e\n20-1000-1012 Installed Height (bottom installed surface to top): 1.286in (32.7mm)\u003cbr\u003e\n20-1000-101010 Installed Height (bottom installed surface to top): 1.121in (28.5mm)\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988603277629,"sku":"20-1000-0806F","price":58.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/20-1000-0806F.jpg?v=1763118696"},{"product_id":"20-1000-0606","title":"Radium V2 AN ORB to AN Male Flare Low Profile Swivel Banjo Fittings (6AN ORB to 6AN Male)","description":"\u003cp\u003eThese banjo fittings have the ability to rotate 360 degrees, even after installation. They are an excellent option for 90-degree connections and are very low profile. Suitable for use in high pressure fuel and oil systems. Do not exceed 400 psi.\u003c\/p\u003e\n\n\u003cp\u003eIndividual Specifications as follows:\u003c\/p\u003e\n\n\u003cp\u003e20-1000-0406 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0606 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0606F Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0806 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0808 Installed Height (bottom of hex to top): 1.019in (25.9mm)\u003cbr\u003e\n20-1000-1006 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-1008 Installed Height (bottom of hex to top): 1.019in (25.9mm)\u003cbr\u003e\n20-1000-1010 Installed Height (bottom installed surface to top): 1.121in (28.5mm)\u003cbr\u003e\n20-1000-1012 Installed Height (bottom installed surface to top): 1.286in (32.7mm)\u003cbr\u003e\n20-1000-101010 Installed Height (bottom installed surface to top): 1.121in (28.5mm)\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988603310397,"sku":"20-1000-0606","price":58.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/20-1000-0606.jpg?v=1763118698"},{"product_id":"20-1000-1006f","title":"Radium V2 AN ORB to AN Male Flare Low Profile Swivel Banjo Fittings (10AN ORB SWIVEL BANJO TO 6AN FEMALE)","description":"\u003cp\u003eThese banjo fittings have the ability to rotate 360 degrees, even after installation. They are an excellent option for 90-degree connections and are very low profile. Suitable for use in high pressure fuel and oil systems. Do not exceed 400 psi.\u003c\/p\u003e\n\n\u003cp\u003eIndividual Specifications as follows:\u003c\/p\u003e\n\n\u003cp\u003e20-1000-0406 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0606 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0606F Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0806 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0808 Installed Height (bottom of hex to top): 1.019in (25.9mm)\u003cbr\u003e\n20-1000-1006 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-1008 Installed Height (bottom of hex to top): 1.019in (25.9mm)\u003cbr\u003e\n20-1000-1010 Installed Height (bottom installed surface to top): 1.121in (28.5mm)\u003cbr\u003e\n20-1000-1012 Installed Height (bottom installed surface to top): 1.286in (32.7mm)\u003cbr\u003e\n20-1000-101010 Installed Height (bottom installed surface to top): 1.121in (28.5mm)\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988603343165,"sku":"20-1000-1006F","price":58.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/20-1000-1006F.jpg?v=1763118699"},{"product_id":"20-1000-0406","title":"Radium V2 AN ORB to AN Male Flare Low Profile Swivel Banjo Fittings (4AN ORB to 6AN Male)","description":"\u003cp\u003eThese banjo fittings have the ability to rotate 360 degrees, even after installation. They are an excellent option for 90-degree connections and are very low profile. Suitable for use in high pressure fuel and oil systems. Do not exceed 400 psi.\u003c\/p\u003e\n\n\u003cp\u003eIndividual Specifications as follows:\u003c\/p\u003e\n\n\u003cp\u003e20-1000-0406 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0606 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0606F Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0806 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0808 Installed Height (bottom of hex to top): 1.019in (25.9mm)\u003cbr\u003e\n20-1000-1006 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-1008 Installed Height (bottom of hex to top): 1.019in (25.9mm)\u003cbr\u003e\n20-1000-1010 Installed Height (bottom installed surface to top): 1.121in (28.5mm)\u003cbr\u003e\n20-1000-1012 Installed Height (bottom installed surface to top): 1.286in (32.7mm)\u003cbr\u003e\n20-1000-101010 Installed Height (bottom installed surface to top): 1.121in (28.5mm)\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988603408701,"sku":"20-1000-0406","price":58.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/20-1000-0406.jpg?v=1763118701"},{"product_id":"20-1000-0808","title":"Radium V2 AN ORB to AN Male Flare Low Profile Swivel Banjo Fittings (8AN ORB to 8AN Male)","description":"\u003cp\u003eThese banjo fittings have the ability to rotate 360 degrees, even after installation. They are an excellent option for 90-degree connections and are very low profile. Suitable for use in high pressure fuel and oil systems. Do not exceed 400 psi.\u003c\/p\u003e\n\n\u003cp\u003eIndividual Specifications as follows:\u003c\/p\u003e\n\n\u003cp\u003e20-1000-0406 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0606 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0606F Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0806 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0808 Installed Height (bottom of hex to top): 1.019in (25.9mm)\u003cbr\u003e\n20-1000-1006 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-1008 Installed Height (bottom of hex to top): 1.019in (25.9mm)\u003cbr\u003e\n20-1000-1010 Installed Height (bottom installed surface to top): 1.121in (28.5mm)\u003cbr\u003e\n20-1000-1012 Installed Height (bottom installed surface to top): 1.286in (32.7mm)\u003cbr\u003e\n20-1000-101010 Installed Height (bottom installed surface to top): 1.121in (28.5mm)\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988603736381,"sku":"20-1000-0808","price":58.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/20-1000-0808.jpg?v=1763118703"},{"product_id":"20-1000-101010","title":"Radium V2 AN ORB to AN Male Flare Low Profile Swivel Banjo Fittings (10AN ORB to Dual 10AN Male)","description":"\u003cp\u003eThese banjo fittings have the ability to rotate 360 degrees, even after installation. They are an excellent option for 90-degree connections and are very low profile. Suitable for use in high pressure fuel and oil systems. Do not exceed 400 psi.\u003c\/p\u003e\n\n\u003cp\u003eIndividual Specifications as follows:\u003c\/p\u003e\n\n\u003cp\u003e20-1000-0406 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0606 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0606F Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0806 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0808 Installed Height (bottom of hex to top): 1.019in (25.9mm)\u003cbr\u003e\n20-1000-1006 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-1008 Installed Height (bottom of hex to top): 1.019in (25.9mm)\u003cbr\u003e\n20-1000-1010 Installed Height (bottom installed surface to top): 1.121in (28.5mm)\u003cbr\u003e\n20-1000-1012 Installed Height (bottom installed surface to top): 1.286in (32.7mm)\u003cbr\u003e\n20-1000-101010 Installed Height (bottom installed surface to top): 1.121in (28.5mm)\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988603965757,"sku":"20-1000-101010","price":58.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/20-1000-101010.jpg?v=1763118703"},{"product_id":"20-1000-1008","title":"Radium V2 AN ORB to AN Male Flare Low Profile Swivel Banjo Fittings (10AN ORB to 8AN Male)","description":"\u003cp\u003eThese banjo fittings have the ability to rotate 360 degrees, even after installation. They are an excellent option for 90-degree connections and are very low profile. Suitable for use in high pressure fuel and oil systems. Do not exceed 400 psi.\u003c\/p\u003e\n\n\u003cp\u003eIndividual Specifications as follows:\u003c\/p\u003e\n\n\u003cp\u003e20-1000-0406 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0606 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0606F Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0806 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0808 Installed Height (bottom of hex to top): 1.019in (25.9mm)\u003cbr\u003e\n20-1000-1006 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-1008 Installed Height (bottom of hex to top): 1.019in (25.9mm)\u003cbr\u003e\n20-1000-1010 Installed Height (bottom installed surface to top): 1.121in (28.5mm)\u003cbr\u003e\n20-1000-1012 Installed Height (bottom installed surface to top): 1.286in (32.7mm)\u003cbr\u003e\n20-1000-101010 Installed Height (bottom installed surface to top): 1.121in (28.5mm)\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988603998525,"sku":"20-1000-1008","price":58.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/20-1000-1008.jpg?v=1763118705"},{"product_id":"20-1000-0606f","title":"Radium V2 AN ORB to AN Male Flare Low Profile Swivel Banjo Fittings (6AN ORB SWIVEL BANJO TO 6AN FEMALE)","description":"\u003cp\u003eThese banjo fittings have the ability to rotate 360 degrees, even after installation. They are an excellent option for 90-degree connections and are very low profile. Suitable for use in high pressure fuel and oil systems. Do not exceed 400 psi.\u003c\/p\u003e\n\n\u003cp\u003eIndividual Specifications as follows:\u003c\/p\u003e\n\n\u003cp\u003e20-1000-0406 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0606 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0606F Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0806 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0808 Installed Height (bottom of hex to top): 1.019in (25.9mm)\u003cbr\u003e\n20-1000-1006 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-1008 Installed Height (bottom of hex to top): 1.019in (25.9mm)\u003cbr\u003e\n20-1000-1010 Installed Height (bottom installed surface to top): 1.121in (28.5mm)\u003cbr\u003e\n20-1000-1012 Installed Height (bottom installed surface to top): 1.286in (32.7mm)\u003cbr\u003e\n20-1000-101010 Installed Height (bottom installed surface to top): 1.121in (28.5mm)\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988604031293,"sku":"20-1000-0606F","price":58.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/20-1000-0606F.jpg?v=1763118706"},{"product_id":"20-1000-1012","title":"Radium V2 AN ORB to AN Male Flare Low Profile Swivel Banjo Fittings (10AN ORB BANJO SWIVEL TO 12AN MALE)","description":"\u003cp\u003eThese banjo fittings have the ability to rotate 360 degrees, even after installation. They are an excellent option for 90-degree connections and are very low profile. Suitable for use in high pressure fuel and oil systems. Do not exceed 400 psi.\u003c\/p\u003e\n\n\u003cp\u003eIndividual Specifications as follows:\u003c\/p\u003e\n\n\u003cp\u003e20-1000-0406 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0606 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0606F Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0806 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0808 Installed Height (bottom of hex to top): 1.019in (25.9mm)\u003cbr\u003e\n20-1000-1006 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-1008 Installed Height (bottom of hex to top): 1.019in (25.9mm)\u003cbr\u003e\n20-1000-1010 Installed Height (bottom installed surface to top): 1.121in (28.5mm)\u003cbr\u003e\n20-1000-1012 Installed Height (bottom installed surface to top): 1.286in (32.7mm)\u003cbr\u003e\n20-1000-101010 Installed Height (bottom installed surface to top): 1.121in (28.5mm)\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988604064061,"sku":"20-1000-1012","price":58.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/20-1000-1012.jpg?v=1763118708"},{"product_id":"20-1000-0810","title":"Radium V2 AN ORB to AN Male Flare Low Profile Swivel Banjo Fittings (8AN ORB to 10AN Male)","description":"\u003cp\u003eThese banjo fittings have the ability to rotate 360 degrees, even after installation. They are an excellent option for 90-degree connections and are very low profile. Suitable for use in high pressure fuel and oil systems. Do not exceed 400 psi.\u003c\/p\u003e\n\n\u003cp\u003eIndividual Specifications as follows:\u003c\/p\u003e\n\n\u003cp\u003e20-1000-0406 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0606 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0606F Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0806 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0808 Installed Height (bottom of hex to top): 1.019in (25.9mm)\u003cbr\u003e\n20-1000-1006 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-1008 Installed Height (bottom of hex to top): 1.019in (25.9mm)\u003cbr\u003e\n20-1000-1010 Installed Height (bottom installed surface to top): 1.121in (28.5mm)\u003cbr\u003e\n20-1000-1012 Installed Height (bottom installed surface to top): 1.286in (32.7mm)\u003cbr\u003e\n20-1000-101010 Installed Height (bottom installed surface to top): 1.121in (28.5mm)\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988604227901,"sku":"20-1000-0810","price":58.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/20-1000-0810.jpg?v=1763118709"},{"product_id":"20-1000-0806","title":"Radium V2 AN ORB to AN Male Flare Low Profile Swivel Banjo Fittings (8AN ORB to 6AN Male)","description":"\u003cp\u003eThese banjo fittings have the ability to rotate 360 degrees, even after installation. They are an excellent option for 90-degree connections and are very low profile. Suitable for use in high pressure fuel and oil systems. Do not exceed 400 psi.\u003c\/p\u003e\n\n\u003cp\u003eIndividual Specifications as follows:\u003c\/p\u003e\n\n\u003cp\u003e20-1000-0406 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0606 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0606F Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0806 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0808 Installed Height (bottom of hex to top): 1.019in (25.9mm)\u003cbr\u003e\n20-1000-1006 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-1008 Installed Height (bottom of hex to top): 1.019in (25.9mm)\u003cbr\u003e\n20-1000-1010 Installed Height (bottom installed surface to top): 1.121in (28.5mm)\u003cbr\u003e\n20-1000-1012 Installed Height (bottom installed surface to top): 1.286in (32.7mm)\u003cbr\u003e\n20-1000-101010 Installed Height (bottom installed surface to top): 1.121in (28.5mm)\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988604260669,"sku":"20-1000-0806","price":58.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/20-1000-0806.jpg?v=1763118710"},{"product_id":"14-0291","title":"Radium AN ORB to Hose Barb Fittings (6AN ORB to 8.5mm Barb)","description":"\u003cp\u003eThese threaded adapter fittings are compatible with AN ORB (O-ring boss) ports. Because the threads on these fittings are not used for sealing, PTFE paste or thread sealant is not required. The O-ring should be lubricated with engine oil.\u003c\/p\u003e\n\n\u003cp\u003eORB ports are an industry standard and found on many automotive plumbing products, including most Radium products. All fittings include FKM (Viton) O-rings.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988604391741,"sku":"14-0291","price":17.45,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/14-0291.jpg?v=1763118712"},{"product_id":"14-0193","title":"Radium AN ORB to Hose Barb Fittings (10AN ORB to 5\/8\" Barb- 15.9mm)","description":"\u003cp\u003eThese threaded adapter fittings are compatible with AN ORB (O-ring boss) ports. Because the threads on these fittings are not used for sealing, PTFE paste or thread sealant is not required. The O-ring should be lubricated with engine oil.\u003c\/p\u003e\n\n\u003cp\u003eORB ports are an industry standard and found on many automotive plumbing products, including most Radium products. All fittings include FKM (Viton) O-rings.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988604457277,"sku":"14-0193","price":26.18,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/14-0193.jpg?v=1763118714"},{"product_id":"14-0192","title":"Radium AN ORB to Hose Barb Fittings (10AN ORB to 1\/2\" Barb- 12.7mm)","description":"\u003cp\u003eThese threaded adapter fittings are compatible with AN ORB (O-ring boss) ports. Because the threads on these fittings are not used for sealing, PTFE paste or thread sealant is not required. The O-ring should be lubricated with engine oil.\u003c\/p\u003e\n\n\u003cp\u003eORB ports are an industry standard and found on many automotive plumbing products, including most Radium products. All fittings include FKM (Viton) O-rings.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988604490045,"sku":"14-0192","price":26.18,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/14-0192.jpg?v=1763118716"},{"product_id":"14-0294","title":"Radium AN ORB to Hose Barb Fittings (8AN ORB to 8.5mm Barb)","description":"\u003cp\u003eThese threaded adapter fittings are compatible with AN ORB (O-ring boss) ports. Because the threads on these fittings are not used for sealing, PTFE paste or thread sealant is not required. The O-ring should be lubricated with engine oil.\u003c\/p\u003e\n\n\u003cp\u003eORB ports are an industry standard and found on many automotive plumbing products, including most Radium products. All fittings include FKM (Viton) O-rings.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988604522813,"sku":"14-0294","price":17.45,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/14-0294.jpg?v=1763118718"},{"product_id":"14-0191","title":"Radium AN ORB to Hose Barb Fittings (10AN ORB to 3\/8\" Barb- 9.5mm)","description":"\u003cp\u003eThese threaded adapter fittings are compatible with AN ORB (O-ring boss) ports. Because the threads on these fittings are not used for sealing, PTFE paste or thread sealant is not required. The O-ring should be lubricated with engine oil.\u003c\/p\u003e\n\n\u003cp\u003eORB ports are an industry standard and found on many automotive plumbing products, including most Radium products. All fittings include FKM (Viton) O-rings.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988607897917,"sku":"14-0191","price":26.18,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/14-0191.jpg?v=1763118721"},{"product_id":"14-0194","title":"Radium AN ORB to Hose Barb Fittings (10AN ORB to 3\/4\" Barb- 19mm)","description":"\u003cp\u003eThese threaded adapter fittings are compatible with AN ORB (O-ring boss) ports. Because the threads on these fittings are not used for sealing, PTFE paste or thread sealant is not required. The O-ring should be lubricated with engine oil.\u003c\/p\u003e\n\n\u003cp\u003eORB ports are an industry standard and found on many automotive plumbing products, including most Radium products. All fittings include FKM (Viton) O-rings.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988607930685,"sku":"14-0194","price":26.18,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/14-0194.jpg?v=1763118723"},{"product_id":"14-0691","title":"Radium AN ORB to Hose Barb Fittings (6an ORB to 10mm Barb)","description":"\u003cp\u003eThese threaded adapter fittings are compatible with AN ORB (O-ring boss) ports. Because the threads on these fittings are not used for sealing, PTFE paste or thread sealant is not required. The O-ring should be lubricated with engine oil.\u003c\/p\u003e\n\n\u003cp\u003eORB ports are an industry standard and found on many automotive plumbing products, including most Radium products. All fittings include FKM (Viton) O-rings.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988608389437,"sku":"14-0691","price":17.45,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/14-0691.jpg?v=1763118724"},{"product_id":"14-0694","title":"Radium AN ORB to Hose Barb Fittings (8AN ORB to 10mm Barb)","description":"\u003cp\u003eThese threaded adapter fittings are compatible with AN ORB (O-ring boss) ports. Because the threads on these fittings are not used for sealing, PTFE paste or thread sealant is not required. The O-ring should be lubricated with engine oil.\u003c\/p\u003e\n\n\u003cp\u003eORB ports are an industry standard and found on many automotive plumbing products, including most Radium products. All fittings include FKM (Viton) O-rings.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988608422205,"sku":"14-0694","price":17.45,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/14-0694.jpg?v=1763118726"},{"product_id":"18-0030","title":"Radium EFI Hose Clamp SINGLE (11.5-13.0mm)","description":"\u003cp\u003eEFI Hose Clamps are used in high pressure applications such as fuel injection systems. The bolt design creates a 360 degree seal to prevent leaks. They feature rolled edges to protect soft hose. They do not dig in and permanently damage the hose like worm-drive clamps. The EFI Hose Clamps are made from 304 stainless steel for superior corrosion resistance.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988608454973,"sku":"18-0030","price":8.47,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/18-0030.jpg?v=1763118727"},{"product_id":"18-0058","title":"Radium EFI Hose Clamp SINGLE (14.5-16.0mm)","description":"\u003cp\u003eEFI Hose Clamps are used in high pressure applications such as fuel injection systems. The bolt design creates a 360 degree seal to prevent leaks. They feature rolled edges to protect soft hose. They do not dig in and permanently damage the hose like worm-drive clamps. The EFI Hose Clamps are made from 304 stainless steel for superior corrosion resistance.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988608487741,"sku":"18-0058","price":8.47,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/18-0030_a58fa3fc-8b3a-45d2-95b5-0df13cbeaa66.jpg?v=1763118728"},{"product_id":"18-0057","title":"Radium EFI Hose Clamp SINGLE (10.5-12mm)","description":"\u003cp\u003eEFI Hose Clamps are used in high pressure applications such as fuel injection systems. The bolt design creates a 360 degree seal to prevent leaks. They feature rolled edges to protect soft hose. They do not dig in and permanently damage the hose like worm-drive clamps. The EFI Hose Clamps are made from 304 stainless steel for superior corrosion resistance.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988608520509,"sku":"18-0057","price":8.47,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/18-0030_d2212419-acdb-40ab-a91b-cb2326807609.jpg?v=1763118730"},{"product_id":"18-0031","title":"Radium EFI Hose Clamp SINGLE (12.5-14.0mm)","description":"\u003cp\u003eEFI Hose Clamps are used in high pressure applications such as fuel injection systems. The bolt design creates a 360 degree seal to prevent leaks. They feature rolled edges to protect soft hose. They do not dig in and permanently damage the hose like worm-drive clamps. The EFI Hose Clamps are made from 304 stainless steel for superior corrosion resistance.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988608586045,"sku":"18-0031","price":8.47,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/18-0030_12462c7b-b4e7-48af-94a3-9ff9eb4d6d14.jpg?v=1763118732"},{"product_id":"18-0032","title":"Radium EFI Hose Clamp SINGLE (13.5-15.0mm)","description":"\u003cp\u003eEFI Hose Clamps are used in high pressure applications such as fuel injection systems. The bolt design creates a 360 degree seal to prevent leaks. They feature rolled edges to protect soft hose. They do not dig in and permanently damage the hose like worm-drive clamps. The EFI Hose Clamps are made from 304 stainless steel for superior corrosion resistance.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988608618813,"sku":"18-0032","price":8.47,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/18-0030_715d95c6-9cfb-44b7-b03f-dea1976ade88.jpg?v=1763118732"},{"product_id":"20-1623-00","title":"Radium DMR-RA Direct Mount Fuel Pressure Regulator- Black","description":"\u003cp\u003eThe Radium Direct Mount Regulator-Rotating Assembly (DMR-RA) is a compact high performance adjustable EFI fuel pressure regulator.\u003c\/p\u003e\n\n\u003cp\u003eMOUNTING\u003cbr\u003e\nThis regulator is designed with a unique highly versatile mounting system. It can be mounted directly to a compatible fuel rail port using the included 360 degree swiveling adapter, or mounted remotely away from the fuel rail (using 20-0624).\u003c\/p\u003e\n\n\u003cp\u003eThe compact size fits in areas with limited space, without sacrificing performance.\u003c\/p\u003e\n\n\u003cp\u003ePLUMBING\u003cbr\u003e\nThe main inlet port on the regulator is female threaded for 6AN ORB. A swiveling double ended adapter (shown below) is included which allows the regulator to be used in any compatible 8AN ORB fuel rail port, such as those found Radium Engineering fuel rails. Other swivel adapters are available but sold separately.\u003c\/p\u003e \n\n\u003cp\u003eIf mounting the regulator off-rail, other adapters can be screwed into this regulator port (sold separately).\u003c\/p\u003e\n\n\u003cp\u003eThe bottom return port is threaded for 6AN ORB. The provided 90 degree 6AN male fuel return fitting can swivel 360 degrees, permitting a multitude of mounting configurations. Other adapter fittings can be installed in the return port if needed (sold separately).\u003c\/p\u003e\n\n\u003cp\u003eThis regulator has two 1\/8\" NPT side port locations that can be used with a pressure gauge, transducer, temperature probe, etc. Two 1\/8\" NPT plugs are provided.\u003c\/p\u003e\n\n\u003cp\u003eFUEL PRESSURE ADJUSTMENT\u003cbr\u003e\nRA-series regulators feature the first tool-less pressure adjustment. A jam nut and set screw are no longer required. With a simple turn of the knob, pressure will be increased or decreased.\u003c\/p\u003e \n\n\u003cp\u003eTo aid in adjusting pressure, there are incremental detents that provide haptic feedback to the user. Every detent permits 1psi (+\/-0.5psi) of adjustment depending on current fuel pressure.\u003c\/p\u003e\n\n\u003cp\u003eFUEL PRESSURE STABILITY\u003cbr\u003e\nWith years of track and bench testing data, the RA-series regulators have been refined to optimize pressure management. A newly designed single stainless steel return orifice generates laminar flow that enhances stability control.\u003c\/p\u003e\n\n\u003cp\u003eMinimum Pressure: 18.5psi (1.3bar)\u003cbr\u003e\nMaximum Pressure: *N\/A\u003cbr\u003e\n*This is rhetorical. The maximum pressure is dependent on the relief valve inside the pump or the maximum current the fuel pump controller allows.\u003c\/p\u003e \n\n\u003cp\u003e1:1 RISING RATE VACUUM REFERENCE\u003cbr\u003e\nRA-series regulators feature a 360 degree swiveling vacuum reference port that is double O-ring sealed. This is the first in the industry. It permits the installer to quickly point the vacuum fitting in any direction with no tools required.\u003c\/p\u003e\n\n\u003cp\u003eThere are 4 interchangeable 10-32 threaded vacuum port fittings provided to cover all scenarios:\u003c\/p\u003e\n\n\u003cp\u003eBarbed Fitting: A black zinc-plated 3\/16\" (5mm) barb machined from high strength steel that is compatible with the following vacuum hoses: 5\/32\" (4mm), 3\/16\" (5mm), and 7\/32\" (6mm).\u003cbr\u003e\n3AN Male Fitting: A black zinc-plated adapter machined from high strength steel that is compatible with 3AN hose ends.\u003cbr\u003e\nPush-To-Connect: A nickel-plated brass fitting with Buna-N O-rings that is compatible with hard plastic 1\/4\" OD tubing.\u003cbr\u003e\nVacuum Plug: A black oxide stainless steel screw that is used to maintain a constant (non dynamic) fuel pressure. Beginning in the mid 1990s, vehicle manufacturers started transitioning to returnless fuel systems to lower EVAP emissions. To keep temperatures lower, these regulators are mounted inside the tank and do NOT have the ability to be vacuum referenced. This plug would be required in this scenario.\u003cbr\u003e\nFUEL COMPATIBILITY\u003c\/p\u003e\n\n\u003cp\u003eAll RA-series regulators are suitable with all gasoline types including unleaded, leaded, oxygenated, and pre-mixes. Furthermore, they are compatible with alcohol blends of fuel including methanol, ethanol, and E85.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988608684349,"sku":"20-1623-00","price":305.54,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/20-1623-00_392b1ead-8a2c-4477-8ceb-18622c2615cd.jpg?v=1763118734"},{"product_id":"20-1623-01","title":"Radium DMR-RA Direct Mount Fuel Pressure Regulator- Green","description":"\u003cp\u003eThe Radium Direct Mount Regulator-Rotating Assembly (DMR-RA) is a compact high performance adjustable EFI fuel pressure regulator.\u003c\/p\u003e\n\n\u003cp\u003eMOUNTING\u003cbr\u003e\nThis regulator is designed with a unique highly versatile mounting system. It can be mounted directly to a compatible fuel rail port using the included 360 degree swiveling adapter, or mounted remotely away from the fuel rail (using 20-0624).\u003c\/p\u003e\n\n\u003cp\u003eThe compact size fits in areas with limited space, without sacrificing performance.\u003c\/p\u003e\n\n\u003cp\u003ePLUMBING\u003cbr\u003e\nThe main inlet port on the regulator is female threaded for 6AN ORB. A swiveling double ended adapter (shown below) is included which allows the regulator to be used in any compatible 8AN ORB fuel rail port, such as those found Radium Engineering fuel rails. Other swivel adapters are available but sold separately.\u003c\/p\u003e \n\n\u003cp\u003eIf mounting the regulator off-rail, other adapters can be screwed into this regulator port (sold separately).\u003c\/p\u003e\n\n\u003cp\u003eThe bottom return port is threaded for 6AN ORB. The provided 90 degree 6AN male fuel return fitting can swivel 360 degrees, permitting a multitude of mounting configurations. Other adapter fittings can be installed in the return port if needed (sold separately).\u003c\/p\u003e\n\n\u003cp\u003eThis regulator has two 1\/8\" NPT side port locations that can be used with a pressure gauge, transducer, temperature probe, etc. Two 1\/8\" NPT plugs are provided.\u003c\/p\u003e\n\n\u003cp\u003eFUEL PRESSURE ADJUSTMENT\u003cbr\u003e\nRA-series regulators feature the first tool-less pressure adjustment. A jam nut and set screw are no longer required. With a simple turn of the knob, pressure will be increased or decreased.\u003c\/p\u003e \n\n\u003cp\u003eTo aid in adjusting pressure, there are incremental detents that provide haptic feedback to the user. Every detent permits 1psi (+\/-0.5psi) of adjustment depending on current fuel pressure.\u003c\/p\u003e\n\n\u003cp\u003eFUEL PRESSURE STABILITY\u003cbr\u003e\nWith years of track and bench testing data, the RA-series regulators have been refined to optimize pressure management. A newly designed single stainless steel return orifice generates laminar flow that enhances stability control.\u003c\/p\u003e\n\n\u003cp\u003eMinimum Pressure: 18.5psi (1.3bar)\u003cbr\u003e\nMaximum Pressure: *N\/A\u003cbr\u003e\n*This is rhetorical. The maximum pressure is dependent on the relief valve inside the pump or the maximum current the fuel pump controller allows.\u003c\/p\u003e \n\n\u003cp\u003e1:1 RISING RATE VACUUM REFERENCE\u003cbr\u003e\nRA-series regulators feature a 360 degree swiveling vacuum reference port that is double O-ring sealed. This is the first in the industry. It permits the installer to quickly point the vacuum fitting in any direction with no tools required.\u003c\/p\u003e\n\n\u003cp\u003eThere are 4 interchangeable 10-32 threaded vacuum port fittings provided to cover all scenarios:\u003c\/p\u003e\n\n\u003cp\u003eBarbed Fitting: A black zinc-plated 3\/16\" (5mm) barb machined from high strength steel that is compatible with the following vacuum hoses: 5\/32\" (4mm), 3\/16\" (5mm), and 7\/32\" (6mm).\u003cbr\u003e\n3AN Male Fitting: A black zinc-plated adapter machined from high strength steel that is compatible with 3AN hose ends.\u003cbr\u003e\nPush-To-Connect: A nickel-plated brass fitting with Buna-N O-rings that is compatible with hard plastic 1\/4\" OD tubing.\u003cbr\u003e\nVacuum Plug: A black oxide stainless steel screw that is used to maintain a constant (non dynamic) fuel pressure. Beginning in the mid 1990s, vehicle manufacturers started transitioning to returnless fuel systems to lower EVAP emissions. To keep temperatures lower, these regulators are mounted inside the tank and do NOT have the ability to be vacuum referenced. This plug would be required in this scenario.\u003cbr\u003e\nFUEL COMPATIBILITY\u003c\/p\u003e\n\n\u003cp\u003eAll RA-series regulators are suitable with all gasoline types including unleaded, leaded, oxygenated, and pre-mixes. Furthermore, they are compatible with alcohol blends of fuel including methanol, ethanol, and E85.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988608749885,"sku":"20-1623-01","price":305.54,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/20-1623-01.jpg?v=1763118735"},{"product_id":"18-0076-a11","title":"Radium Engineering Radiator Cap Type A Black- 1.1 Bar (16.0 PSI)","description":"\u003cp\u003eRadium high performance radiator caps are engineered to improve cooling efficiency. The radiator cap is an essential part of an upgraded cooling system and will help to safely maximize engine performance by controlling the coolant boiling point. Each OEM replacement radiator cap is manufactured from stamped stainless steel for durability and feature silicone sealing elements that are superior to natural rubber gaskets.\u003c\/p\u003e\n\n\u003cp\u003eAvailable in 3 pressure ratings: 1.1Bar (16.0psi), 1.3Bar (18.9psi), and 1.5Bar (21.8psi). A higher radiator coolant pressure effectively raises the boiling temperature of the coolant, providing extra safety margin and preventing air pocket cavitation at the water pump\u003c\/p\u003e\n\n\u003cp\u003eAlso available in 2 common styles (Type-A and Type-B). Radium radiator caps are designed for mini size (32mm ID) radiator necks only. Please confirm what style your radiator uses prior to ordering.\u003c\/p\u003e\n\n\u003cp\u003eBelow are popular vehicles with their respective radiator cap style that is used from the OEM factory. NOTE: there are many vehicles not listed below that use one of these radiator cap styles.\u003c\/p\u003e\n\n\u003cp\u003eType-A\u003c\/p\u003e\n\n\u003cp\u003e1990-1993 Honda Integra\u003cbr\u003e\n1991-2005 Honda NSX\u003cbr\u003e\n1990-1993 Honda Accord\u003cbr\u003e\n1988-1991 Honda Civic\u003cbr\u003e\n2016-2019 Honda Civic\u003cbr\u003e\n1988-1991 Honda CRX\u003cbr\u003e\n1992-2001 Honda Prelude\u003cbr\u003e\n2003-2008 Infiniti G35\u003cbr\u003e\n2008-up Infiniti G37\u003cbr\u003e\n2014-up Infiniti Q50\u003cbr\u003e\n2014-up Infiniti Q60\u003cbr\u003e\n1992-2000 Lexus SC400\u003cbr\u003e\n1990-1995 Mazda Cosmo\u003cbr\u003e\n1990-2005 Mazda Miata\u003cbr\u003e\n2006-up Mazda MX-5\u003cbr\u003e\n1986-2002 Mazda RX-7\u003cbr\u003e\n2004-2011 Mazda RX-8\u003cbr\u003e\n1991-1999 Mitsubishi 3000GT\u003cbr\u003e\n1990-1999 Mitsubishi Eclipse\u003cbr\u003e\nMitsubishi Lancer\/EVO\u003cbr\u003e\n1989-1998 Nissan 180SX\u003cbr\u003e\n1989-1998 Nissan 200SX\u003cbr\u003e\n1989-1998 Nissan 240SX\u003cbr\u003e\n1990-1996 Nissan 300ZX\u003cbr\u003e\n2003-2009 Nissan 350Z\u003cbr\u003e\n2009-up Nissan 370Z\u003cbr\u003e\n2005-up Nissan Frontier\u003cbr\u003e\n2009-up Nissan GT-R\u003cbr\u003e\n1989-2002 Nissan Silvia\u003cbr\u003e\n1989-2002 Nissan Skyline\u003cbr\u003e\n1993-up Subaru Impreza\u003cbr\u003e\n1990-up Subaru Legacy\u003cbr\u003e\n2015-up Subaru WRX STi\u003cbr\u003e\n2015-up Subaru WRX\u003cbr\u003e\n1982-1995 Toyota Celica\u003cbr\u003e\n1985-1995 Toyota MR2\u003cbr\u003e\n1986-1992 Toyota Supra\u003cbr\u003e\nRadium Coolant Expansion Tank\u003cbr\u003e\nType-B\u003c\/p\u003e\n\n\u003cp\u003e1994-2001 Honda Integra\u003cbr\u003e\n2002-2006 Honda Integra\u003cbr\u003e\n2004-2008 Honda Accord\u003cbr\u003e\n1994-1997 Honda Accord\u003cbr\u003e\n1992-2015 Honda Civic\u003cbr\u003e\n1993-1997 Honda Del Sol\u003cbr\u003e\n2003-2011 Honda Element\u003cbr\u003e\n2007-up Honda Fit\u003cbr\u003e\n2000-2009 Honda S2000\u003cbr\u003e\n2008-up Lexus LX570\u003cbr\u003e\n1998-2005 Lexus IS300\u003cbr\u003e\n2012-up Subaru BRZ\u003cbr\u003e\n2012-up Toyota 86\u003cbr\u003e\n2008-up Toyota Land Cruiser\u003cbr\u003e\n2008-up Toyota Sequoia\u003cbr\u003e\n1993-2002 Toyota Supra\u003cbr\u003e\n2007-up Toyota Tundra\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988608815421,"sku":"18-0076-A11","price":51.4,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/18-0076-A11.jpg?v=1763118736"},{"product_id":"18-0076-a15","title":"Radium Engineering Radiator Cap Type A Black- 1.5 Bar (21.8 PSI)","description":"\u003cp\u003eRadium high performance radiator caps are engineered to improve cooling efficiency. The radiator cap is an essential part of an upgraded cooling system and will help to safely maximize engine performance by controlling the coolant boiling point. Each OEM replacement radiator cap is manufactured from stamped stainless steel for durability and feature silicone sealing elements that are superior to natural rubber gaskets.\u003c\/p\u003e\n\n\u003cp\u003eAvailable in 3 pressure ratings: 1.1Bar (16.0psi), 1.3Bar (18.9psi), and 1.5Bar (21.8psi). A higher radiator coolant pressure effectively raises the boiling temperature of the coolant, providing extra safety margin and preventing air pocket cavitation at the water pump\u003c\/p\u003e\n\n\u003cp\u003eAlso available in 2 common styles (Type-A and Type-B). Radium radiator caps are designed for mini size (32mm ID) radiator necks only. Please confirm what style your radiator uses prior to ordering.\u003c\/p\u003e\n\n\u003cp\u003eBelow are popular vehicles with their respective radiator cap style that is used from the OEM factory. NOTE: there are many vehicles not listed below that use one of these radiator cap styles.\u003c\/p\u003e\n\n\u003cp\u003eType-A\u003c\/p\u003e\n\n\u003cp\u003e1990-1993 Honda Integra\u003cbr\u003e\n1991-2005 Honda NSX\u003cbr\u003e\n1990-1993 Honda Accord\u003cbr\u003e\n1988-1991 Honda Civic\u003cbr\u003e\n2016-2019 Honda Civic\u003cbr\u003e\n1988-1991 Honda CRX\u003cbr\u003e\n1992-2001 Honda Prelude\u003cbr\u003e\n2003-2008 Infiniti G35\u003cbr\u003e\n2008-up Infiniti G37\u003cbr\u003e\n2014-up Infiniti Q50\u003cbr\u003e\n2014-up Infiniti Q60\u003cbr\u003e\n1992-2000 Lexus SC400\u003cbr\u003e\n1990-1995 Mazda Cosmo\u003cbr\u003e\n1990-2005 Mazda Miata\u003cbr\u003e\n2006-up Mazda MX-5\u003cbr\u003e\n1986-2002 Mazda RX-7\u003cbr\u003e\n2004-2011 Mazda RX-8\u003cbr\u003e\n1991-1999 Mitsubishi 3000GT\u003cbr\u003e\n1990-1999 Mitsubishi Eclipse\u003cbr\u003e\nMitsubishi Lancer\/EVO\u003cbr\u003e\n1989-1998 Nissan 180SX\u003cbr\u003e\n1989-1998 Nissan 200SX\u003cbr\u003e\n1989-1998 Nissan 240SX\u003cbr\u003e\n1990-1996 Nissan 300ZX\u003cbr\u003e\n2003-2009 Nissan 350Z\u003cbr\u003e\n2009-up Nissan 370Z\u003cbr\u003e\n2005-up Nissan Frontier\u003cbr\u003e\n2009-up Nissan GT-R\u003cbr\u003e\n1989-2002 Nissan Silvia\u003cbr\u003e\n1989-2002 Nissan Skyline\u003cbr\u003e\n1993-up Subaru Impreza\u003cbr\u003e\n1990-up Subaru Legacy\u003cbr\u003e\n2015-up Subaru WRX STi\u003cbr\u003e\n2015-up Subaru WRX\u003cbr\u003e\n1982-1995 Toyota Celica\u003cbr\u003e\n1985-1995 Toyota MR2\u003cbr\u003e\n1986-1992 Toyota Supra\u003cbr\u003e\nRadium Coolant Expansion Tank\u003cbr\u003e\nType-B\u003c\/p\u003e\n\n\u003cp\u003e1994-2001 Honda Integra\u003cbr\u003e\n2002-2006 Honda Integra\u003cbr\u003e\n2004-2008 Honda Accord\u003cbr\u003e\n1994-1997 Honda Accord\u003cbr\u003e\n1992-2015 Honda Civic\u003cbr\u003e\n1993-1997 Honda Del Sol\u003cbr\u003e\n2003-2011 Honda Element\u003cbr\u003e\n2007-up Honda Fit\u003cbr\u003e\n2000-2009 Honda S2000\u003cbr\u003e\n2008-up Lexus LX570\u003cbr\u003e\n1998-2005 Lexus IS300\u003cbr\u003e\n2012-up Subaru BRZ\u003cbr\u003e\n2012-up Toyota 86\u003cbr\u003e\n2008-up Toyota Land Cruiser\u003cbr\u003e\n2008-up Toyota Sequoia\u003cbr\u003e\n1993-2002 Toyota Supra\u003cbr\u003e\n2007-up Toyota Tundra\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988608848189,"sku":"18-0076-A15","price":51.4,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/18-0076-A11_8d314b98-6374-4013-9b8b-3594e8eec26c.jpg?v=1763118738"},{"product_id":"18-0076-a13","title":"Radium Engineering Radiator Cap Type A Black- 1.3 Bar (18.9 PSI)","description":"\u003cp\u003eRadium high performance radiator caps are engineered to improve cooling efficiency. The radiator cap is an essential part of an upgraded cooling system and will help to safely maximize engine performance by controlling the coolant boiling point. Each OEM replacement radiator cap is manufactured from stamped stainless steel for durability and feature silicone sealing elements that are superior to natural rubber gaskets.\u003c\/p\u003e\n\n\u003cp\u003eAvailable in 3 pressure ratings: 1.1Bar (16.0psi), 1.3Bar (18.9psi), and 1.5Bar (21.8psi). A higher radiator coolant pressure effectively raises the boiling temperature of the coolant, providing extra safety margin and preventing air pocket cavitation at the water pump\u003c\/p\u003e\n\n\u003cp\u003eAlso available in 2 common styles (Type-A and Type-B). Radium radiator caps are designed for mini size (32mm ID) radiator necks only. Please confirm what style your radiator uses prior to ordering.\u003c\/p\u003e\n\n\u003cp\u003eBelow are popular vehicles with their respective radiator cap style that is used from the OEM factory. NOTE: there are many vehicles not listed below that use one of these radiator cap styles.\u003c\/p\u003e\n\n\u003cp\u003eType-A\u003c\/p\u003e\n\n\u003cp\u003e1990-1993 Honda Integra\u003cbr\u003e\n1991-2005 Honda NSX\u003cbr\u003e\n1990-1993 Honda Accord\u003cbr\u003e\n1988-1991 Honda Civic\u003cbr\u003e\n2016-2019 Honda Civic\u003cbr\u003e\n1988-1991 Honda CRX\u003cbr\u003e\n1992-2001 Honda Prelude\u003cbr\u003e\n2003-2008 Infiniti G35\u003cbr\u003e\n2008-up Infiniti G37\u003cbr\u003e\n2014-up Infiniti Q50\u003cbr\u003e\n2014-up Infiniti Q60\u003cbr\u003e\n1992-2000 Lexus SC400\u003cbr\u003e\n1990-1995 Mazda Cosmo\u003cbr\u003e\n1990-2005 Mazda Miata\u003cbr\u003e\n2006-up Mazda MX-5\u003cbr\u003e\n1986-2002 Mazda RX-7\u003cbr\u003e\n2004-2011 Mazda RX-8\u003cbr\u003e\n1991-1999 Mitsubishi 3000GT\u003cbr\u003e\n1990-1999 Mitsubishi Eclipse\u003cbr\u003e\nMitsubishi Lancer\/EVO\u003cbr\u003e\n1989-1998 Nissan 180SX\u003cbr\u003e\n1989-1998 Nissan 200SX\u003cbr\u003e\n1989-1998 Nissan 240SX\u003cbr\u003e\n1990-1996 Nissan 300ZX\u003cbr\u003e\n2003-2009 Nissan 350Z\u003cbr\u003e\n2009-up Nissan 370Z\u003cbr\u003e\n2005-up Nissan Frontier\u003cbr\u003e\n2009-up Nissan GT-R\u003cbr\u003e\n1989-2002 Nissan Silvia\u003cbr\u003e\n1989-2002 Nissan Skyline\u003cbr\u003e\n1993-up Subaru Impreza\u003cbr\u003e\n1990-up Subaru Legacy\u003cbr\u003e\n2015-up Subaru WRX STi\u003cbr\u003e\n2015-up Subaru WRX\u003cbr\u003e\n1982-1995 Toyota Celica\u003cbr\u003e\n1985-1995 Toyota MR2\u003cbr\u003e\n1986-1992 Toyota Supra\u003cbr\u003e\nRadium Coolant Expansion Tank\u003cbr\u003e\nType-B\u003c\/p\u003e\n\n\u003cp\u003e1994-2001 Honda Integra\u003cbr\u003e\n2002-2006 Honda Integra\u003cbr\u003e\n2004-2008 Honda Accord\u003cbr\u003e\n1994-1997 Honda Accord\u003cbr\u003e\n1992-2015 Honda Civic\u003cbr\u003e\n1993-1997 Honda Del Sol\u003cbr\u003e\n2003-2011 Honda Element\u003cbr\u003e\n2007-up Honda Fit\u003cbr\u003e\n2000-2009 Honda S2000\u003cbr\u003e\n2008-up Lexus LX570\u003cbr\u003e\n1998-2005 Lexus IS300\u003cbr\u003e\n2012-up Subaru BRZ\u003cbr\u003e\n2012-up Toyota 86\u003cbr\u003e\n2008-up Toyota Land Cruiser\u003cbr\u003e\n2008-up Toyota Sequoia\u003cbr\u003e\n1993-2002 Toyota Supra\u003cbr\u003e\n2007-up Toyota Tundra\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988608913725,"sku":"18-0076-A13","price":51.4,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/18-0076-A11_43b3ec77-219f-42b1-a121-1818ed1742d0.jpg?v=1763118740"},{"product_id":"20-0776","title":"Radium V2 FPD-R Fuel Pulse Dampener - 8AN ORB","description":"\u003cp\u003eV2 FPD: Even after tightened, the newest 8AN ORB dampers (20-0776 and 20-0777), will swivel permiting the vacuum port to be clocked 360 degrees.\u003c\/p\u003e\n\n\u003cp\u003eThe opening and closing of fuel injectors creates pressure pulses in the fuel rail which can lead to unstable fuel pressure. In order to achieve a safe and consistent rail pressure, a fuel pulse damper (FPD) is often necessary. The FPD's internal diaphragm will absorb oscillating pulses and stabilize fuel pressure. This correction can be measured throughout the RPM range and can often help idle surge, especially with high flow injectors. Furthermore, a fuel pulse damper can help solve erratic lean air\/fuel ratio spikes, commonly experienced as \"stumbling\", that are difficult to tune out.\u003c\/p\u003e\n\n\u003cp\u003eWhat makes Radium FPDs unique?\u003c\/p\u003e\n\n\u003cp\u003eAlong with having the flexibilty of using common fittings, Radium Engineering FPD's use a vacuum\/boost reference port which allows for proper fuel pulse damper performance even at elevated fuel pressures. This becomes essential for boosted systems that use a 1:1 rising rate fuel pressure regulator.\u003c\/p\u003e\n\n\u003cp\u003eWhat is the difference between FPD-R and FPD-XR?\u003c\/p\u003e\n\n\u003cp\u003eThe FPD-R (green top) is slightly shorter than the FPD-XR (black top) allowing it to be used in space-contrained applications.\u003c\/p\u003e\n\n\u003cp\u003eWHICH DAMPER DO I CHOOSE?\u003c\/p\u003e\n\n\u003cp\u003eThe FPD-R (Fuel Pulse Damper-Range) and FPD-XR (Fuel Pulse Damper-Extra Range) both have unique base \"static\" fuel pressure requirements:\u003c\/p\u003e\n\n\u003cp\u003eFPD-R base pressure requirement = 40 - 70psi (static)\u003cbr\u003e\nFPD-XR base pressure requirement = 40 - 105psi (static)\u003cbr\u003e\nBase pressure is the fuel pressure measured when the fuel pump is running WITHOUT a vacuum line connected to the regulator.\u003c\/p\u003e\n\n\u003cp\u003eIMPORTANT: The ranges above are base static fuel pressures only. Any dynamic fuel pressure created by a rising-rate FPR outside of this range is acceptable, but only when the base \"static\" fuel pressure is set within these ranges and the vacuum\/boost reference line is connected.\u003c\/p\u003e\n\n\u003cp\u003eExample 1:\u003c\/p\u003e\n\n\u003cp\u003eVehicle: Mitsubishi EVO\u003cbr\u003e\nOEM Base Static Fuel Pressure: 43.5psi\u003cbr\u003e\nBoost Pressure: 30psi\u003cbr\u003e\nRising Rate Pressure Regulator? Yes\u003cbr\u003e\nCan I use a FPD-R? Yes. Even though fuel pressure is 73.5psi at full boost, the FPD-R will work because the base static pressure was set within the 40-70psi requirement. However, the vacuum\/boost reference line must be installed.\u003cbr\u003e\nCan I use a FPD-XR? Yes. Also, the vacuum\/boost reference line does not need to be installed since maximum fuel pressure does not exceed 105psi.\u003cbr\u003e\nExample 2:\u003c\/p\u003e\n\n\u003cp\u003eVehicle: BMW E46 M3\u003cbr\u003e\nOEM Base Static Fuel Pressure: 72.5psi\u003cbr\u003e\nBoost Pressure: 20psi\u003cbr\u003e\nRising Rate Pressure Regulator? Yes\u003cbr\u003e\nCan I use a FPD-R? No. Base static fuel pressure exceeds the 40-70psi requirement.\u003cbr\u003e\nCan I use a FPD-XR? Yes. Also, the vacuum\/boost reference line does not need to be installed since maximum fuel pressure does not exceed 105psi.\u003cbr\u003e\nFeatures:\u003c\/p\u003e\n\n\u003cp\u003eThe anodized aluminum housing features two selectable threaded male fittings. The 8AN ORB version (right) seals using a Viton O-ring while the 3\/8\" NPT variation (left) seals with the tapered pipe threads.\u003c\/p\u003e\n\n\u003cp\u003eThe FPDs can be mounted at any possible angle including upside down. For best results, the damper should be mounted directly onto the fuel rail(s).\u003c\/p\u003e\n\n\u003cp\u003eThis product is safe for use with all fuel types including alcohol blends such as E85. Download the installation instructions for more info.\u003c\/p\u003e\n\n\u003cp\u003eIncluded:\u003c\/p\u003e\n\n\u003cp\u003eAnodized and laser engraved aluminum top, R=range or XR=extra range\u003cbr\u003e\nAnodized aluminum body with male threads, 8AN ORB or 3\/8\" NPT\u003cbr\u003e\nStainless steel hardware\u003cbr\u003e\nRubber vacuum hose, 4mm ID\u003cbr\u003e\nVacuum hose Y-fitting\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988609274173,"sku":"20-0776","price":153.25,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/20-0776_3711c8ff-e84f-4816-b60d-e5d4ff5c8884.jpg?v=1763118741"},{"product_id":"20-0895","title":"Radium PA Nylon Submersible Fuel Tubing Kit w\/Clamps- Colour: Black, size: 3\/8\" x 8.2\" (208mm)","description":"\u003cp\u003eThese fuel tubing kits are commonly used for plumbing in-tank submerged fuel pumps. The flexible convoluted tubing is manufactured from polyamide nylon and is therefore resistant to all fuel types including alcohol blends such as E85 and suitable for EFI fuel pressure.\u003c\/p\u003e\n\n\u003cp\u003eThere are 2 inner diameter sizes available including 5\/16\" (8mm) and 3\/8\" (10mm). When installing, run hot water over the ends first to loosen the material. This allows the tubing to fit snugly over the barb. Next, torque the reuseable stainless steel SAE J1508 clamps to 13.3 in-lbs. These clamps provide a 360 degree seal with rolled edges to protect the tubing.\u003c\/p\u003e\n\n\u003cp\u003eNOTE: All tubes are translucent white excluding 20-0875 and 20-0895 which are opaque black.\u003c\/p\u003e\n\n\u003cp\u003eRADIUM P\/N: 20-0175, 20-0375, 20-0775, and 20-0875 compatible the following.\u003c\/p\u003e\n\n\u003cp\u003eWalbro GSS341 255LPH Fuel Pump\u003cbr\u003e\nWalbro GSS342 255LPH Fuel Pump\u003cbr\u003e\nAEM 50-1000 Gas Fuel Pump\u003cbr\u003e\nAEM 50-1200 E85 Fuel Pump\u003cbr\u003e\nAEM 50-1220 E85 Fuel Pump\u003cbr\u003e\nAeromotive 340R 11141 Fuel Pump\u003cbr\u003e\nAeromotive 340R 11142 Fuel Pump\u003cbr\u003e\nDeatschwerks 9-301-1000 Fuel Pump\u003cbr\u003e\nRADIUM P\/N: 20-0195, 20-0395, 20-0795, and 20-0895 compatible the following.\u003c\/p\u003e\n\n\u003cp\u003eWalbro F9000262 Gas Fuel Pump\u003cbr\u003e\nWalbro F9000267 E85 Fuel Pump\u003cbr\u003e\nWalbro F9000273 Gas Fuel Pump\u003cbr\u003e\nWalbro F9000274 E85 Fuel Pump\u003cbr\u003e\nWalbro F9000285 E85 Fuel Pump\u003cbr\u003e\nWalbro F9000295 E85 Fuel Pump\u003cbr\u003e\nBosch Motorsports BR540 Fuel Pump\u003cbr\u003e\nDeatschwerks DW400 Fuel Pump\u003cbr\u003e\nDeatschwerks DW440 Brushless Fuel Pump\u003cbr\u003e\nTi Automotive E5LM Brushless Fuel Pump\u003cbr\u003e\nIncludes:\u003c\/p\u003e\n\n\u003cp\u003ePA Nylon Convoluted Tubing\u003cbr\u003e\nStainless Steel EFI Tube Clamps (x2)\u003cbr\u003e\nTesting:\u003c\/p\u003e\n\n\u003cp\u003eThese tubes have been tested at Radium Engineering.\u003c\/p\u003e\n\n\u003cp\u003eWorking Pressure: 300psi\u003cbr\u003e\nBurst Pressure: 450psi\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988609306941,"sku":"20-0895","price":33.94,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/20-0895.jpg?v=1763118742"},{"product_id":"20-0775","title":"Radium PA Nylon Submersible Fuel Tubing Kit w\/Clamps- Colour: Clear, size: 5\/16\" X 17.7\" (450mm)","description":"\u003cp\u003eThese fuel tubing kits are commonly used for plumbing in-tank submerged fuel pumps. The flexible convoluted tubing is manufactured from polyamide nylon and is therefore resistant to all fuel types including alcohol blends such as E85 and suitable for EFI fuel pressure.\u003c\/p\u003e\n\n\u003cp\u003eThere are 2 inner diameter sizes available including 5\/16\" (8mm) and 3\/8\" (10mm). When installing, run hot water over the ends first to loosen the material. This allows the tubing to fit snugly over the barb. Next, torque the reuseable stainless steel SAE J1508 clamps to 13.3 in-lbs. These clamps provide a 360 degree seal with rolled edges to protect the tubing.\u003c\/p\u003e\n\n\u003cp\u003eNOTE: All tubes are translucent white excluding 20-0875 and 20-0895 which are opaque black.\u003c\/p\u003e\n\n\u003cp\u003eRADIUM P\/N: 20-0175, 20-0375, 20-0775, and 20-0875 compatible the following.\u003c\/p\u003e\n\n\u003cp\u003eWalbro GSS341 255LPH Fuel Pump\u003cbr\u003e\nWalbro GSS342 255LPH Fuel Pump\u003cbr\u003e\nAEM 50-1000 Gas Fuel Pump\u003cbr\u003e\nAEM 50-1200 E85 Fuel Pump\u003cbr\u003e\nAEM 50-1220 E85 Fuel Pump\u003cbr\u003e\nAeromotive 340R 11141 Fuel Pump\u003cbr\u003e\nAeromotive 340R 11142 Fuel Pump\u003cbr\u003e\nDeatschwerks 9-301-1000 Fuel Pump\u003cbr\u003e\nRADIUM P\/N: 20-0195, 20-0395, 20-0795, and 20-0895 compatible the following.\u003c\/p\u003e\n\n\u003cp\u003eWalbro F9000262 Gas Fuel Pump\u003cbr\u003e\nWalbro F9000267 E85 Fuel Pump\u003cbr\u003e\nWalbro F9000273 Gas Fuel Pump\u003cbr\u003e\nWalbro F9000274 E85 Fuel Pump\u003cbr\u003e\nWalbro F9000285 E85 Fuel Pump\u003cbr\u003e\nWalbro F9000295 E85 Fuel Pump\u003cbr\u003e\nBosch Motorsports BR540 Fuel Pump\u003cbr\u003e\nDeatschwerks DW400 Fuel Pump\u003cbr\u003e\nDeatschwerks DW440 Brushless Fuel Pump\u003cbr\u003e\nTi Automotive E5LM Brushless Fuel Pump\u003cbr\u003e\nIncludes:\u003c\/p\u003e\n\n\u003cp\u003ePA Nylon Convoluted Tubing\u003cbr\u003e\nStainless Steel EFI Tube Clamps (x2)\u003cbr\u003e\nTesting:\u003c\/p\u003e\n\n\u003cp\u003eThese tubes have been tested at Radium Engineering.\u003c\/p\u003e\n\n\u003cp\u003eWorking Pressure: 300psi\u003cbr\u003e\nBurst Pressure: 450psi\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988609405245,"sku":"20-0775","price":33.94,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/20-0775.jpg?v=1763118744"},{"product_id":"20-0875","title":"Radium PA Nylon Submersible Fuel Tubing Kit w\/Clamps- Colour: Black, size: 5\/16\" x 8.2\" (208mm)","description":"\u003cp\u003eThese fuel tubing kits are commonly used for plumbing in-tank submerged fuel pumps. The flexible convoluted tubing is manufactured from polyamide nylon and is therefore resistant to all fuel types including alcohol blends such as E85 and suitable for EFI fuel pressure.\u003c\/p\u003e\n\n\u003cp\u003eThere are 2 inner diameter sizes available including 5\/16\" (8mm) and 3\/8\" (10mm). When installing, run hot water over the ends first to loosen the material. This allows the tubing to fit snugly over the barb. Next, torque the reuseable stainless steel SAE J1508 clamps to 13.3 in-lbs. These clamps provide a 360 degree seal with rolled edges to protect the tubing.\u003c\/p\u003e\n\n\u003cp\u003eNOTE: All tubes are translucent white excluding 20-0875 and 20-0895 which are opaque black.\u003c\/p\u003e\n\n\u003cp\u003eRADIUM P\/N: 20-0175, 20-0375, 20-0775, and 20-0875 compatible the following.\u003c\/p\u003e\n\n\u003cp\u003eWalbro GSS341 255LPH Fuel Pump\u003cbr\u003e\nWalbro GSS342 255LPH Fuel Pump\u003cbr\u003e\nAEM 50-1000 Gas Fuel Pump\u003cbr\u003e\nAEM 50-1200 E85 Fuel Pump\u003cbr\u003e\nAEM 50-1220 E85 Fuel Pump\u003cbr\u003e\nAeromotive 340R 11141 Fuel Pump\u003cbr\u003e\nAeromotive 340R 11142 Fuel Pump\u003cbr\u003e\nDeatschwerks 9-301-1000 Fuel Pump\u003cbr\u003e\nRADIUM P\/N: 20-0195, 20-0395, 20-0795, and 20-0895 compatible the following.\u003c\/p\u003e\n\n\u003cp\u003eWalbro F9000262 Gas Fuel Pump\u003cbr\u003e\nWalbro F9000267 E85 Fuel Pump\u003cbr\u003e\nWalbro F9000273 Gas Fuel Pump\u003cbr\u003e\nWalbro F9000274 E85 Fuel Pump\u003cbr\u003e\nWalbro F9000285 E85 Fuel Pump\u003cbr\u003e\nWalbro F9000295 E85 Fuel Pump\u003cbr\u003e\nBosch Motorsports BR540 Fuel Pump\u003cbr\u003e\nDeatschwerks DW400 Fuel Pump\u003cbr\u003e\nDeatschwerks DW440 Brushless Fuel Pump\u003cbr\u003e\nTi Automotive E5LM Brushless Fuel Pump\u003cbr\u003e\nIncludes:\u003c\/p\u003e\n\n\u003cp\u003ePA Nylon Convoluted Tubing\u003cbr\u003e\nStainless Steel EFI Tube Clamps (x2)\u003cbr\u003e\nTesting:\u003c\/p\u003e\n\n\u003cp\u003eThese tubes have been tested at Radium Engineering.\u003c\/p\u003e\n\n\u003cp\u003eWorking Pressure: 300psi\u003cbr\u003e\nBurst Pressure: 450psi\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988609438013,"sku":"20-0875","price":33.94,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/20-0875.jpg?v=1763118745"},{"product_id":"20-0175","title":"Radium PA Nylon Submersible Fuel Tubing Kit w\/Clamps- Colour: Clear, size: 5\/16\" x 12.8\" (325mm)","description":"\u003cp\u003eThese fuel tubing kits are commonly used for plumbing in-tank submerged fuel pumps. The flexible convoluted tubing is manufactured from polyamide nylon and is therefore resistant to all fuel types including alcohol blends such as E85 and suitable for EFI fuel pressure.\u003c\/p\u003e\n\n\u003cp\u003eThere are 2 inner diameter sizes available including 5\/16\" (8mm) and 3\/8\" (10mm). When installing, run hot water over the ends first to loosen the material. This allows the tubing to fit snugly over the barb. Next, torque the reuseable stainless steel SAE J1508 clamps to 13.3 in-lbs. These clamps provide a 360 degree seal with rolled edges to protect the tubing.\u003c\/p\u003e\n\n\u003cp\u003eNOTE: All tubes are translucent white excluding 20-0875 and 20-0895 which are opaque black.\u003c\/p\u003e\n\n\u003cp\u003eRADIUM P\/N: 20-0175, 20-0375, 20-0775, and 20-0875 compatible the following.\u003c\/p\u003e\n\n\u003cp\u003eWalbro GSS341 255LPH Fuel Pump\u003cbr\u003e\nWalbro GSS342 255LPH Fuel Pump\u003cbr\u003e\nAEM 50-1000 Gas Fuel Pump\u003cbr\u003e\nAEM 50-1200 E85 Fuel Pump\u003cbr\u003e\nAEM 50-1220 E85 Fuel Pump\u003cbr\u003e\nAeromotive 340R 11141 Fuel Pump\u003cbr\u003e\nAeromotive 340R 11142 Fuel Pump\u003cbr\u003e\nDeatschwerks 9-301-1000 Fuel Pump\u003cbr\u003e\nRADIUM P\/N: 20-0195, 20-0395, 20-0795, and 20-0895 compatible the following.\u003c\/p\u003e\n\n\u003cp\u003eWalbro F9000262 Gas Fuel Pump\u003cbr\u003e\nWalbro F9000267 E85 Fuel Pump\u003cbr\u003e\nWalbro F9000273 Gas Fuel Pump\u003cbr\u003e\nWalbro F9000274 E85 Fuel Pump\u003cbr\u003e\nWalbro F9000285 E85 Fuel Pump\u003cbr\u003e\nWalbro F9000295 E85 Fuel Pump\u003cbr\u003e\nBosch Motorsports BR540 Fuel Pump\u003cbr\u003e\nDeatschwerks DW400 Fuel Pump\u003cbr\u003e\nDeatschwerks DW440 Brushless Fuel Pump\u003cbr\u003e\nTi Automotive E5LM Brushless Fuel Pump\u003cbr\u003e\nIncludes:\u003c\/p\u003e\n\n\u003cp\u003ePA Nylon Convoluted Tubing\u003cbr\u003e\nStainless Steel EFI Tube Clamps (x2)\u003cbr\u003e\nTesting:\u003c\/p\u003e\n\n\u003cp\u003eThese tubes have been tested at Radium Engineering.\u003c\/p\u003e\n\n\u003cp\u003eWorking Pressure: 300psi\u003cbr\u003e\nBurst Pressure: 450psi\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988609470781,"sku":"20-0175","price":33.94,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/20-0175.jpg?v=1763118746"},{"product_id":"20-0795","title":"Radium PA Nylon Submersible Fuel Tubing Kit w\/Clamps- Colour: Clear, size: 3\/8\" X 17.7\" (450mm)","description":"\u003cp\u003eThese fuel tubing kits are commonly used for plumbing in-tank submerged fuel pumps. The flexible convoluted tubing is manufactured from polyamide nylon and is therefore resistant to all fuel types including alcohol blends such as E85 and suitable for EFI fuel pressure.\u003c\/p\u003e\n\n\u003cp\u003eThere are 2 inner diameter sizes available including 5\/16\" (8mm) and 3\/8\" (10mm). When installing, run hot water over the ends first to loosen the material. This allows the tubing to fit snugly over the barb. Next, torque the reuseable stainless steel SAE J1508 clamps to 13.3 in-lbs. These clamps provide a 360 degree seal with rolled edges to protect the tubing.\u003c\/p\u003e\n\n\u003cp\u003eNOTE: All tubes are translucent white excluding 20-0875 and 20-0895 which are opaque black.\u003c\/p\u003e\n\n\u003cp\u003eRADIUM P\/N: 20-0175, 20-0375, 20-0775, and 20-0875 compatible the following.\u003c\/p\u003e\n\n\u003cp\u003eWalbro GSS341 255LPH Fuel Pump\u003cbr\u003e\nWalbro GSS342 255LPH Fuel Pump\u003cbr\u003e\nAEM 50-1000 Gas Fuel Pump\u003cbr\u003e\nAEM 50-1200 E85 Fuel Pump\u003cbr\u003e\nAEM 50-1220 E85 Fuel Pump\u003cbr\u003e\nAeromotive 340R 11141 Fuel Pump\u003cbr\u003e\nAeromotive 340R 11142 Fuel Pump\u003cbr\u003e\nDeatschwerks 9-301-1000 Fuel Pump\u003cbr\u003e\nRADIUM P\/N: 20-0195, 20-0395, 20-0795, and 20-0895 compatible the following.\u003c\/p\u003e\n\n\u003cp\u003eWalbro F9000262 Gas Fuel Pump\u003cbr\u003e\nWalbro F9000267 E85 Fuel Pump\u003cbr\u003e\nWalbro F9000273 Gas Fuel Pump\u003cbr\u003e\nWalbro F9000274 E85 Fuel Pump\u003cbr\u003e\nWalbro F9000285 E85 Fuel Pump\u003cbr\u003e\nWalbro F9000295 E85 Fuel Pump\u003cbr\u003e\nBosch Motorsports BR540 Fuel Pump\u003cbr\u003e\nDeatschwerks DW400 Fuel Pump\u003cbr\u003e\nDeatschwerks DW440 Brushless Fuel Pump\u003cbr\u003e\nTi Automotive E5LM Brushless Fuel Pump\u003cbr\u003e\nIncludes:\u003c\/p\u003e\n\n\u003cp\u003ePA Nylon Convoluted Tubing\u003cbr\u003e\nStainless Steel EFI Tube Clamps (x2)\u003cbr\u003e\nTesting:\u003c\/p\u003e\n\n\u003cp\u003eThese tubes have been tested at Radium Engineering.\u003c\/p\u003e\n\n\u003cp\u003eWorking Pressure: 300psi\u003cbr\u003e\nBurst Pressure: 450psi\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988609503549,"sku":"20-0795","price":33.94,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/20-0795.jpg?v=1763118748"},{"product_id":"20-0195","title":"Radium PA Nylon Submersible Fuel Tubing Kit w\/Clamps- Colour: Clear, size: 3\/8\" x 12.8\" (325mm)","description":"\u003cp\u003eThese fuel tubing kits are commonly used for plumbing in-tank submerged fuel pumps. The flexible convoluted tubing is manufactured from polyamide nylon and is therefore resistant to all fuel types including alcohol blends such as E85 and suitable for EFI fuel pressure.\u003c\/p\u003e\n\n\u003cp\u003eThere are 2 inner diameter sizes available including 5\/16\" (8mm) and 3\/8\" (10mm). When installing, run hot water over the ends first to loosen the material. This allows the tubing to fit snugly over the barb. Next, torque the reuseable stainless steel SAE J1508 clamps to 13.3 in-lbs. These clamps provide a 360 degree seal with rolled edges to protect the tubing.\u003c\/p\u003e\n\n\u003cp\u003eNOTE: All tubes are translucent white excluding 20-0875 and 20-0895 which are opaque black.\u003c\/p\u003e\n\n\u003cp\u003eRADIUM P\/N: 20-0175, 20-0375, 20-0775, and 20-0875 compatible the following.\u003c\/p\u003e\n\n\u003cp\u003eWalbro GSS341 255LPH Fuel Pump\u003cbr\u003e\nWalbro GSS342 255LPH Fuel Pump\u003cbr\u003e\nAEM 50-1000 Gas Fuel Pump\u003cbr\u003e\nAEM 50-1200 E85 Fuel Pump\u003cbr\u003e\nAEM 50-1220 E85 Fuel Pump\u003cbr\u003e\nAeromotive 340R 11141 Fuel Pump\u003cbr\u003e\nAeromotive 340R 11142 Fuel Pump\u003cbr\u003e\nDeatschwerks 9-301-1000 Fuel Pump\u003cbr\u003e\nRADIUM P\/N: 20-0195, 20-0395, 20-0795, and 20-0895 compatible the following.\u003c\/p\u003e\n\n\u003cp\u003eWalbro F9000262 Gas Fuel Pump\u003cbr\u003e\nWalbro F9000267 E85 Fuel Pump\u003cbr\u003e\nWalbro F9000273 Gas Fuel Pump\u003cbr\u003e\nWalbro F9000274 E85 Fuel Pump\u003cbr\u003e\nWalbro F9000285 E85 Fuel Pump\u003cbr\u003e\nWalbro F9000295 E85 Fuel Pump\u003cbr\u003e\nBosch Motorsports BR540 Fuel Pump\u003cbr\u003e\nDeatschwerks DW400 Fuel Pump\u003cbr\u003e\nDeatschwerks DW440 Brushless Fuel Pump\u003cbr\u003e\nTi Automotive E5LM Brushless Fuel Pump\u003cbr\u003e\nIncludes:\u003c\/p\u003e\n\n\u003cp\u003ePA Nylon Convoluted Tubing\u003cbr\u003e\nStainless Steel EFI Tube Clamps (x2)\u003cbr\u003e\nTesting:\u003c\/p\u003e\n\n\u003cp\u003eThese tubes have been tested at Radium Engineering.\u003c\/p\u003e\n\n\u003cp\u003eWorking Pressure: 300psi\u003cbr\u003e\nBurst Pressure: 450psi\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988610617661,"sku":"20-0195","price":33.94,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/20-0195.jpg?v=1763118749"},{"product_id":"20-0395","title":"Radium PA Nylon Submersible Fuel Tubing Kit w\/Clamps- Colour: Clear, size: 3\/8\" x 6.5\" (165mm)","description":"\u003cp\u003eThese fuel tubing kits are commonly used for plumbing in-tank submerged fuel pumps. The flexible convoluted tubing is manufactured from polyamide nylon and is therefore resistant to all fuel types including alcohol blends such as E85 and suitable for EFI fuel pressure.\u003c\/p\u003e\n\n\u003cp\u003eThere are 2 inner diameter sizes available including 5\/16\" (8mm) and 3\/8\" (10mm). When installing, run hot water over the ends first to loosen the material. This allows the tubing to fit snugly over the barb. Next, torque the reuseable stainless steel SAE J1508 clamps to 13.3 in-lbs. These clamps provide a 360 degree seal with rolled edges to protect the tubing.\u003c\/p\u003e\n\n\u003cp\u003eNOTE: All tubes are translucent white excluding 20-0875 and 20-0895 which are opaque black.\u003c\/p\u003e\n\n\u003cp\u003eRADIUM P\/N: 20-0175, 20-0375, 20-0775, and 20-0875 compatible the following.\u003c\/p\u003e\n\n\u003cp\u003eWalbro GSS341 255LPH Fuel Pump\u003cbr\u003e\nWalbro GSS342 255LPH Fuel Pump\u003cbr\u003e\nAEM 50-1000 Gas Fuel Pump\u003cbr\u003e\nAEM 50-1200 E85 Fuel Pump\u003cbr\u003e\nAEM 50-1220 E85 Fuel Pump\u003cbr\u003e\nAeromotive 340R 11141 Fuel Pump\u003cbr\u003e\nAeromotive 340R 11142 Fuel Pump\u003cbr\u003e\nDeatschwerks 9-301-1000 Fuel Pump\u003cbr\u003e\nRADIUM P\/N: 20-0195, 20-0395, 20-0795, and 20-0895 compatible the following.\u003c\/p\u003e\n\n\u003cp\u003eWalbro F9000262 Gas Fuel Pump\u003cbr\u003e\nWalbro F9000267 E85 Fuel Pump\u003cbr\u003e\nWalbro F9000273 Gas Fuel Pump\u003cbr\u003e\nWalbro F9000274 E85 Fuel Pump\u003cbr\u003e\nWalbro F9000285 E85 Fuel Pump\u003cbr\u003e\nWalbro F9000295 E85 Fuel Pump\u003cbr\u003e\nBosch Motorsports BR540 Fuel Pump\u003cbr\u003e\nDeatschwerks DW400 Fuel Pump\u003cbr\u003e\nDeatschwerks DW440 Brushless Fuel Pump\u003cbr\u003e\nTi Automotive E5LM Brushless Fuel Pump\u003cbr\u003e\nIncludes:\u003c\/p\u003e\n\n\u003cp\u003ePA Nylon Convoluted Tubing\u003cbr\u003e\nStainless Steel EFI Tube Clamps (x2)\u003cbr\u003e\nTesting:\u003c\/p\u003e\n\n\u003cp\u003eThese tubes have been tested at Radium Engineering.\u003c\/p\u003e\n\n\u003cp\u003eWorking Pressure: 300psi\u003cbr\u003e\nBurst Pressure: 450psi\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988611174717,"sku":"20-0395","price":33.94,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/20-0395.jpg?v=1763118750"},{"product_id":"20-0375","title":"Radium PA Nylon Submersible Fuel Tubing Kit w\/Clamps- Colour: Clear, size: 5\/16\" x 6.5\" (165mm)","description":"\u003cp\u003eThese fuel tubing kits are commonly used for plumbing in-tank submerged fuel pumps. The flexible convoluted tubing is manufactured from polyamide nylon and is therefore resistant to all fuel types including alcohol blends such as E85 and suitable for EFI fuel pressure.\u003c\/p\u003e\n\n\u003cp\u003eThere are 2 inner diameter sizes available including 5\/16\" (8mm) and 3\/8\" (10mm). When installing, run hot water over the ends first to loosen the material. This allows the tubing to fit snugly over the barb. Next, torque the reuseable stainless steel SAE J1508 clamps to 13.3 in-lbs. These clamps provide a 360 degree seal with rolled edges to protect the tubing.\u003c\/p\u003e\n\n\u003cp\u003eNOTE: All tubes are translucent white excluding 20-0875 and 20-0895 which are opaque black.\u003c\/p\u003e\n\n\u003cp\u003eRADIUM P\/N: 20-0175, 20-0375, 20-0775, and 20-0875 compatible the following.\u003c\/p\u003e\n\n\u003cp\u003eWalbro GSS341 255LPH Fuel Pump\u003cbr\u003e\nWalbro GSS342 255LPH Fuel Pump\u003cbr\u003e\nAEM 50-1000 Gas Fuel Pump\u003cbr\u003e\nAEM 50-1200 E85 Fuel Pump\u003cbr\u003e\nAEM 50-1220 E85 Fuel Pump\u003cbr\u003e\nAeromotive 340R 11141 Fuel Pump\u003cbr\u003e\nAeromotive 340R 11142 Fuel Pump\u003cbr\u003e\nDeatschwerks 9-301-1000 Fuel Pump\u003cbr\u003e\nRADIUM P\/N: 20-0195, 20-0395, 20-0795, and 20-0895 compatible the following.\u003c\/p\u003e\n\n\u003cp\u003eWalbro F9000262 Gas Fuel Pump\u003cbr\u003e\nWalbro F9000267 E85 Fuel Pump\u003cbr\u003e\nWalbro F9000273 Gas Fuel Pump\u003cbr\u003e\nWalbro F9000274 E85 Fuel Pump\u003cbr\u003e\nWalbro F9000285 E85 Fuel Pump\u003cbr\u003e\nWalbro F9000295 E85 Fuel Pump\u003cbr\u003e\nBosch Motorsports BR540 Fuel Pump\u003cbr\u003e\nDeatschwerks DW400 Fuel Pump\u003cbr\u003e\nDeatschwerks DW440 Brushless Fuel Pump\u003cbr\u003e\nTi Automotive E5LM Brushless Fuel Pump\u003cbr\u003e\nIncludes:\u003c\/p\u003e\n\n\u003cp\u003ePA Nylon Convoluted Tubing\u003cbr\u003e\nStainless Steel EFI Tube Clamps (x2)\u003cbr\u003e\nTesting:\u003c\/p\u003e\n\n\u003cp\u003eThese tubes have been tested at Radium Engineering.\u003c\/p\u003e\n\n\u003cp\u003eWorking Pressure: 300psi\u003cbr\u003e\nBurst Pressure: 450psi\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988611469629,"sku":"20-0375","price":33.94,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/20-0375.jpg?v=1763118752"},{"product_id":"20-1000-0685","title":"Radium V2 AN ORB to Hose Barb Low Profile Swivel Banjo Fittings- 6AN ORB to 8.5mm Barb","description":"\u003cp\u003eThese banjo fittings have the ability to rotate 360 degrees, even after installation. They are an excellent option for 90-degree connections and are very low profile. Suitable for use in high pressure fuel and oil systems. Do not exceed 400 psi.\u003c\/p\u003e\n\n\u003cp\u003eIndividual Specifications as follows:\u003c\/p\u003e\n\n\u003cp\u003e20-1000-0465 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0485 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0665 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0685 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0885 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-1085 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988611502397,"sku":"20-1000-0685","price":58.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/20-1000-0685.jpg?v=1763118753"},{"product_id":"20-1000-0606-85","title":"Radium V2 AN ORB to Hose Barb Low Profile Swivel Banjo Fittings- 6AN ORB Swivel Banjo 8.5mm Barb to 6AN Male Bulkhead","description":"\u003cp\u003eThese banjo fittings have the ability to rotate 360 degrees, even after installation. They are an excellent option for 90-degree connections and are very low profile. Suitable for use in high pressure fuel and oil systems. Do not exceed 400 psi.\u003c\/p\u003e\n\n\u003cp\u003eIndividual Specifications as follows:\u003c\/p\u003e\n\n\u003cp\u003e20-1000-0465 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0485 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0665 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0685 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0885 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-1085 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988611535165,"sku":"20-1000-0606-85","price":58.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/20-1000-0606-85.jpg?v=1763118754"},{"product_id":"20-1000-1010b","title":"Radium V2 AN ORB to Hose Barb Low Profile Swivel Banjo Fittings- 10AN ORB Swivel Banjo to 10mm Barb","description":"\u003cp\u003eThese banjo fittings have the ability to rotate 360 degrees, even after installation. They are an excellent option for 90-degree connections and are very low profile. Suitable for use in high pressure fuel and oil systems. Do not exceed 400 psi.\u003c\/p\u003e\n\n\u003cp\u003eIndividual Specifications as follows:\u003c\/p\u003e\n\n\u003cp\u003e20-1000-0465 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0485 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0665 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0685 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0885 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-1085 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988611567933,"sku":"20-1000-1010B","price":58.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/20-1000-1010B.jpg?v=1763118756"},{"product_id":"20-1000-0485","title":"Radium V2 AN ORB to Hose Barb Low Profile Swivel Banjo Fittings- 4AN ORB Swivel Banjo to 8.5mm Barb","description":"\u003cp\u003eThese banjo fittings have the ability to rotate 360 degrees, even after installation. They are an excellent option for 90-degree connections and are very low profile. Suitable for use in high pressure fuel and oil systems. Do not exceed 400 psi.\u003c\/p\u003e\n\n\u003cp\u003eIndividual Specifications as follows:\u003c\/p\u003e\n\n\u003cp\u003e20-1000-0465 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0485 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0665 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0685 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0885 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-1085 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988611600701,"sku":"20-1000-0485","price":58.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/20-1000-0485.jpg?v=1763118757"},{"product_id":"20-1000-1085","title":"Radium V2 AN ORB to Hose Barb Low Profile Swivel Banjo Fittings- 10AN ORB to 8.5mm Barb","description":"\u003cp\u003eThese banjo fittings have the ability to rotate 360 degrees, even after installation. They are an excellent option for 90-degree connections and are very low profile. Suitable for use in high pressure fuel and oil systems. Do not exceed 400 psi.\u003c\/p\u003e\n\n\u003cp\u003eIndividual Specifications as follows:\u003c\/p\u003e\n\n\u003cp\u003e20-1000-0465 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0485 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0665 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0685 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0885 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-1085 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988611764541,"sku":"20-1000-1085","price":58.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/20-1000-1085.jpg?v=1763118758"},{"product_id":"20-1000-0865","title":"Radium V2 AN ORB to Hose Barb Low Profile Swivel Banjo Fittings- 8AN ORB SWIVEL BANJO TO 6.5MM BARB","description":"\u003cp\u003eThese banjo fittings have the ability to rotate 360 degrees, even after installation. They are an excellent option for 90-degree connections and are very low profile. Suitable for use in high pressure fuel and oil systems. Do not exceed 400 psi.\u003c\/p\u003e\n\n\u003cp\u003eIndividual Specifications as follows:\u003c\/p\u003e\n\n\u003cp\u003e20-1000-0465 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0485 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0665 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0685 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0885 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-1085 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988611862845,"sku":"20-1000-0865","price":58.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/20-1000-0865.jpg?v=1763118759"},{"product_id":"20-1000-0610b","title":"Radium V2 AN ORB to Hose Barb Low Profile Swivel Banjo Fittings- 6AN ORB SWIVEL BANJO TO 10MM BARB","description":"\u003cp\u003eThese banjo fittings have the ability to rotate 360 degrees, even after installation. They are an excellent option for 90-degree connections and are very low profile. Suitable for use in high pressure fuel and oil systems. Do not exceed 400 psi.\u003c\/p\u003e\n\n\u003cp\u003eIndividual Specifications as follows:\u003c\/p\u003e\n\n\u003cp\u003e20-1000-0465 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0485 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0665 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0685 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0885 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-1085 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988611928381,"sku":"20-1000-0610B","price":58.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/20-1000-0610B.jpg?v=1763118762"},{"product_id":"20-1000-0465","title":"Radium V2 AN ORB to Hose Barb Low Profile Swivel Banjo Fittings- 4AN ORB Swivel Banjo to 6.5mm Barb","description":"\u003cp\u003eThese banjo fittings have the ability to rotate 360 degrees, even after installation. They are an excellent option for 90-degree connections and are very low profile. Suitable for use in high pressure fuel and oil systems. Do not exceed 400 psi.\u003c\/p\u003e\n\n\u003cp\u003eIndividual Specifications as follows:\u003c\/p\u003e\n\n\u003cp\u003e20-1000-0465 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0485 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0665 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0685 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-0885 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003cbr\u003e\n20-1000-1085 Installed Height (bottom installed surface to top): 0.797in (20.2mm)\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50988612059453,"sku":"20-1000-0465","price":58.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/files\/20-1000-0465.jpg?v=1763118764"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/7548\/3197\/collections\/hardrace_dfefd3a8-4aeb-4ab4-8056-be694413ae81.jpg?v=1768106609","url":"https:\/\/www.modsdirect.com.au\/collections\/radium-engineering-catch-cans-fuel-rails-performance-fuel-systems.oembed","provider":"ModsDirect","version":"1.0","type":"link"}